HD UNO is a revolutionary 3-in-1 polish that cuts, polishes and finishes all new and old finishes with less work and less mess.  HD UNO guarantees  to produce amazing results or your purchase will be cheerfully refunded.

HD UNO is designed to remove P1200 and finer scratches, oxidation and swirl marks, and is ideal for all high volume body shop, paint repair, and detailing environments where speed and premium results are required.  HD UNO is 100% silicone-free and body shop safe!  HD UNO is designed to offer exceptional open time, leaving the surface wet for superior performance.
HD UNO Total Auto Polish is a revolution in automotive finish care. No other polish can achieve the amazing results of HD UNO on paint, clear plastic, and glass.

HD UNO is a single liquid system that does it all. Almost like magic, HD UNO polishes all high gloss automotive surfaces to a perfect finish, every time.

On all clearcoat paint finishes, HD UNO removes fine scratches, swirl marks and oxidation with ease, restoring full gloss and a perfectly clear paint finish.

On clear plastic, such as headlight and tail light lenses, HD UNO removes fine scratches, oxidation and yellowing.

On exterior glass, HD UNO removes water spots and heavy film buildup, restoring full clarity.

HD UNO is so versatile that it can replace a shelf full of other automotive polishes and still achieve better results.

HD UNO is a water-based product that can be worked for long periods without drying (high open time). It is also highly concentrated, reducing overall cost, waste and pollution. Used properly, a single bottle of HD UNO is enough product to polish 4-6 cars with moderate defects.

Directions:

Shake Well Before Use. Apply HD UNO to a cool surface in a shaded area.  Dispense enough polish to work on a 2’ by 2’ area.

CUT:     Attach a cutting pad to your buffer and set the speed to 1,500 - 1,800 RPM.  Work HD UNO using light to medium pressure in overlapping passes.  To prevent holograms and burning the paint, keep the pad moving at approximately 6-9” per second and do not buff dry. Remove polish residue with a clean microfiber towel. Repeat if necessary.

POLISH:    To remove fine scratches, oxidation and compound swirl marks, attach a polishing pad to your buffer and set the speed to 1,200 - 1,500 RPM.  Work HD UNO in overlapping passes.  Keep the pad moving at approximately 6-9” per second and do not buff dry. Remove polish residue with a clean microfiber towel.  Repeat if necessary.

To inspect work, use a Quick Detailer or IPA and a clean dry microfiber polishing towel.

FINISH:    To create an ultra-high-gloss, hologram-free final finish, attach finishing pad to your buffer and set the speed to 1,000 RPM.   Keep the finishing pad moving at approximately 6” per second and buff until polish residue is almost completely gone.  Repeat if necessary. Follow up with HD Poxy, a nano-polymer sealant, to enhance the gloss and achieve a long lasting, superior protection.

HD-UNO - HD Uno MSDS Sheet

* This MSDS Sheet is in .pdf format. Please download Adobe Acrobat Reader to view it. You can also right-click and 'save as' to save it.
 

Product rating

Customer Reviews

Add your review here

Your name:	*
Your message:	*
Image verification
Type the characters you see in the picture:
	*	Add review