3D TRIM CARE is ideal for plastics that have discolored or started to lose their luster from the Sun and weather damage. It is very easy to use. All you need is a black terry cloth sponge or even just a regular applicator sponge.
A little bit which goes a very long way. Massage it in gently. Get it into the seams and cracks.
Making sure we get 100% coverage over the whole area that has been affected.
Try not to be to messy with it because then you have to clean up.
Go ahead and rub it on the windshield wipers as well. A lot of times those are made of plastic or materials that will be able to be restored.
Now that you have it on there, let it sit for a second. then go ahead and wipe off any of the excess.
Now you have complete restoration of your vinyls, plastics and rubber for the exterior of your vehicle. There is no dyes, no fillers, there is no greasy or oily residue and your plastics are brought back to life.
3D TRIM CARE is a thick polymer protectant designed to restore and protect the original look of bumpers, trim, and rubber molding for up to 3 months. It is the perfect product to use on your vehicle to lock in that new original look. Nourish and protect rubber gaskets & weatherstripping by treating them with 3D TRIM CARE Protectant. It will even bring back that great original look that many older cars have on their interior trim such as vinyl door and dash trim. This product is extremely gentle and will not promote cracking or a drying out effect. Protecting your exterior trim from the ugly appearance of the white wax marks. Just simply apply before polishing or waxing and you’ll block out any pesky residue from attacking your trim. This product also prevents further damage that results from the sun’s harmful rays as it has built in UV blockers that will stabilize your hard work from further deterioration. This special formula will make your faded windshield wiper arms and cowling black as if they were painted. For best results, first clean with 3D’s ORANGE DEGREASER to lay the groundwork for that long lasting shine. Fortified with UV blocking polymers designed to retard the harmful effects of the sun preventing it from fading and drying out your trim. Don’t replace expensive trim when the solution is available in this easy to use protectant. 3D Trim Care Protectant makes it easy to get bumpers and cladding shining again in a jiffy. This product will not only bring back the original look, but it will also preserve your recently cleaned areas from future grime and dirt buildup. This product has a nice gel consistency that makes for easy application. So if you are looking for the best trim care protector for your car that is easy to apply, 3D’s trim restorer is your answer. Be sure to enhance any car polish and wax routine with a quick application of 3D Trim Care Protectant.
* This MSDS Sheet is in .pdf format. Please download Adobe Acrobat Reader to view it. You can also right-click and 'save as' to save it.
To insure optimal bonding of protectant, thoroughly clean the surface with 3D Orange Citrus Cleaner or All Purpose Cleaner. Make sure trim is dry before applying gel to surface. Generously coat desired trim and allow product to penetrate into trim with adequate dwell time. Wipe in residue with clean dry microfiber towel removing excess.
For extremely faded trim a 2nd application will amplify your original results. Repeat as necessary.