HD NITRO SEAL is a co-polymer paint sealant. Make sure that the car is properly prepared by cleaning it and removing any scratches on the surface underneath. Wipe it down with rubbing alcohol then clean up any wax or existing contaminants that may be on the paint. HD NITRO SEAL extremely simple product to apply. We labelled it with black to go with the black pad is part "A" Red to go to Red pad is part "B"
using very little, typically one these cans will do two cars entirely. You take and apply three small quick dabs and apply in even directions by hand
now wait about 10 to 15 minutes for the product to flash on the surface meaning it's going to turn out like a hazy white color to ensure completely let it flash. Start on one part of the car.
Do the entire vehicle then come back. start again with part B again we're going to take and put 3 small drops onto the red pad the red bottle and put on the surface. With this one you can apply in kind of a massaging or buffing motion. Make sure the most important part about this is applying complete coverage.
You don't want to miss spots and have some parts that are covered and protected, and other parts that are not. What the part B does, is it brings out the shine and the depth and the color that part "A" can't do. Don't be afraid to apply it to the plastics or the trim or for the grill or lights or even on glass it's not going to cause any issues. If anything it will coat and protect those parts longer.
However HD NITRO SEAL is intended for paint use to cover the entire body to protect seal the entire surface. All we have to do from this point on his wait one hour we want to wait for this to cure we are now going to remove it with the microfiber towel that is found in the package.
All you are going to do is take and wipe it down, back and fourth. What you will notice after you're done is you will notice superior paint protection so “sheeting” not necessarily “water beading”
which means the water isn't going to sit on the surface. It's going to start to fall off the first time it rains outside. You'll make a turn, and it will just slide right off the surface.
You need to know not to get the surface wet for 24 hours right after you apply HD NITRO SEAL because the two elements are still bonding with one another and providing the best protection.
So the longer that you allow the surface to remain dry without getting wet the better your paint protection will be and a longer-lasting paint sealant will be created.
This is a two part polymer paint sealant system. It is easy to apply! HD® Nitro SealTM is a revolutionary two part copolymer paint sealant system that is designed to be used by everyone who owns a vehicle. It is easily applied by hand; so anyone can do it.
No need for endless manuals, polishers, or equipment. HD® Nitro SealTM will make your car look newer than when you bought it. This two part process is the first of its kind. HD® Nitro SealTM activates its brilliance when you blend Part A and Part B(patent pending). on the surface of the automobile. Each bottle is topped off with nitrogen gas to ensure longevity of the shelf life and deliver spectacular results. Part A is an aminofunctional fluid group and Part B is a hybrid Montan wax composite. Part A provides excellent surface affinity and spreadability through its incredible wetting feature (that’s why a little goes a long way), thus anchoring the product to the car paint.
What others are saying:
“thats the best looking 11 year old jetta i've ever seen.”
“now you have a product that not only looks fantastic, but it will outlast most other LSPs of its kind. Here is what I think: Not only does NS look as good as POXY, it looks BETTER. Actually, a lot better. The gloss is off the charts…It also feels very very slick. NS is everything one would want.” – Thomas Dekany
Another blogger mentions: “Looks like the final sealant purchase for me. Nitro will replace my Zaino”
- 1 HD Nitro Seal Part A
- 1 HD Nitro Seal Part B
- 1 Red Applicator
- 1 Black Applicator
- 1 Microfiber Towel
- 1 Latex Glove
- 1 Instruction Sheet
- 1 Nitro Seal Box (UPS orders only).
*Orders shipped with USPS Flat Rate Small Box will not include the Nitro Seal Box
Before using HD® Nitro SealTMensure that your car surface is clean and dry. We recommend washing with 3D® Pink Car Soap or take it to your local car wash.
Since the HD® Nitro SealTMKit has enough product to seal 2 mid-sized vans or sedans, there will be some left over sealant. Therefore, do not over apply as you will be wasting another valuable application that could have been shared on another vehicle.
HD® Nitro SealTMcures to its optimum performance in 24 hours. During that period do not wash or expose your car to any water or rain.
Use the latex glove provided while using the product.
Begin your application process at the front of the vehicle and work your way around the car in sections until you return to your starting point.
For better results: Before buffing off Part A & B, allow them to cure even longer up to 24 hours, if you have the time.
For ultimate results: The smoother your car surface is the better your shine and durability will be. Therefore, we recommend claying your car and polishing using HD Uno®.
Storage & Expiration: To ensure the longevity of the shelf life; each bottle is topped with nitrogen gas. Once the bottles are opened, make sure that their caps are tightly sealed. Store in a dry and dark location. We recommend that you use HD® Nitro SealTM within 30 days of opening the bottles.
This sealant's highly durable protection lasts up to 12 months based on typical car usage*.
* Car usage can vary depending on maintenance, mileage, weather conditions, parking location (ie. covered garage or next to a sprinkler) and other factors. Please bear in mind that our tests are based on a car that gets driven around 15,000 miles per annum, parked in a covered garage, and washed regularly. It is unreasonable to expect that all cars will have the same durability length. You can ensure of the durability by applying HD POXY every 3 months.
Keep out of reach of children.